IJIREM

Abstract

In this research, the cementation matrices utilized a variety of nanomaterials, including multiwall carbon nanotubes and Nano-clays. The characteristics of were looked at. Nano-kaolin was the topic of the research. Clay platelets were exfoliated using the chemical ammonium chloride. OPC is utilized in the research. The carbon nanotube was applied at a % cement ratio, and the OPC was substituted with (NMK) at a percentage cement ratio. In the research, the proportion of mixed cement. A percent cement was utilized to create the mixed cement mortar. The new mortar pastes were cured in water for 28 days after being % hours. The usage of mixed cement is being explored. In addition to the control mixture, substituting OPC with 6 wt. percent NMK enhanced 18 percent, while blending percent with carbon nanotubes improved 29 percent. After just 5 grams of nanomaterial is applied to 1 kilogram of cement, the quantity of cement required was reduced by 30 percent. Chemical resistance has risen substantially as a consequence of the usage of MWCNT.

Keywords

Carbon Fiber, Carbon Nanotubes, Cement Mortar, Coarse Aggregate, Compressive.

Reference

[1] Hirani KJ. Biochemical Characterization and Probiotic Potential of Lactic Acid Bacteria Isolated from Camel Milk. Biosci Biotechnol Res Commun. 2021;

[2] Niladry G, Ranjit S. Biogenic synthesis of bimetallic nanoparticles using cassia tora leaf extract. Res J Biotechnol. 2020;

[3] Harinder V, Jyoti S, Amolkumar S, Singh GP, Jasdeep P. Isolation and characterization of stress inducible protein (TaSti/Hop) from heat-tolerant wheat cultivar C306. Res J Biotechnol. 2019;

[4] Chaudhary P, Khati P, Chaudhary A, Gangola S, Kumar R, Sharma A. Bioinoculation using indigenous Bacillus spp. improves growth and yield of Zea mays under the influence of nanozeolite. 3 Biotech. 2021;

[5] Bureau of Indian Standard(BIS). Methods of physical tests for hydraulic cement. Test. 2005;

[6] Ubertini F, Laflamme S, Ceylan H, Luigi Materazzi A, Cerni G, Saleem H, et al. Novel nanocomposite technologies for dynamic monitoring of structures: A comparison between cement-based embeddable and soft elastomeric surface sensors. Smart Mater Struct. 2014;

[7] Goyal AK, Singh R, Chauhan G, Rath G. Non-invasive systemic drug delivery through mucosal routes. Artificial Cells, Nanomedicine and Biotechnology. 2018.

[8] Parray HA, Shukla S, Perween R, Khatri R, Shrivastava T, Singh V, et al. Inhalation monoclonal antibody therapy: a new way to treat and manage respiratory infections. Applied Microbiology and Biotechnology. 2021.

[9] Vilaplana JL, Baeza FJ, Galao O, Zornoza E, Garcés P. Self-sensing properties of alkali activated blast furnace slag (BFS) composites reinforced with carbon fibers. Materials (Basel). 2013;

[10] Jyothi MN, Rai D V., Nagesh babu R. Identification and Characterization of High Temperature Stress Responsive Novel miRNAs in French Bean (Phaseolus vulgaris). Appl Biochem Biotechnol. 2015;

[11] Nainwal N, Jawla S, Singh R, Saharan VA. Transdermal applications of ethosomes–a detailed review. Journal of Liposome Research. 2019.

[12] Agrawal N, Jain A, Agarwal A. Simulation of network on chip for 3D router architecture. Int J Recent Technol Eng. 2019;

[13] Agrawal T, Agrawal AK, Singh SK. An efficient key-accumulation cryptosystem for cloud. Int J Eng Adv Technol. 2019;

[14] Agrawal T, Agrawal AK, Singh SK. Cloud sanctuary through effectual access control and cryptographic model. J Adv Res Dyn Control Syst. 2019;

[15] Wen S, Chung DDL. Partial replacement of carbon fiber by carbon black in multifunctional cement-matrix composites. Carbon N Y. 2007;

[16] Sharma M. An allusive study of non-performing assets in private and public sector banks in India. J Adv Res Dyn Control Syst. 2019;

[17] Mishra S, Jain S, Rai C, Gandhi N. Security challenges in semantic web of things. In: Advances in Intelligent Systems and Computing. 2019.

[18] Choudhary P, Dwivedi RK, Umang. A novel framework for prioritizing emergency vehicles through queueing theory. Int J Eng Adv Technol. 2019;

[19] Joshi M, Agarwal AK, Gupta B. Fractal image compression and its techniques: A review. In: Advances in Intelligent Systems and Computing. 2019.

[20] Baeza FJ, Galao O, Zornoza E, Garcés P. Effect of aspect ratio on strain sensing capacity of carbon fiber reinforced cement composites. Mater Des. 2013;

[21] Chen PW, Chung DDL. Carbon fiber reinforced concrete for smart structures capable of non-destructive flaw detection. Smart Mater Struct. 1993;

[22] Baeza FJ, Galao O, Zornoza E, Garcés P. Multifunctional cement composites strain and damage sensors applied on reinforced concrete (RC) structural elements. Materials (Basel). 2013;

[23] Xu B, Li Z. Paraffin/diatomite/multi-wall carbon nanotubes composite phase change material tailor-made for thermal energy storage cement-based composites. Energy. 2014;

[24] Wang B, Han Y, Liu S. Effect of highly dispersed carbon nanotubes on the flexural toughness of cement-based composites. Constr Build Mater. 2013;

[25] Morsy MS, Alsayed SH, Aqel M. Hybrid effect of carbon nanotube and nano-clay on physico-mechanical properties of cement mortar. Constr Build Mater. 2011;

Cites this article as

[Bharamjit Singh, Ashish Kumar (2021), Characteristic and Strength Investigation of Nano-Materials Concrete, International Journal of Innovative Research in Engineering & Management (IJIREM), Vol-8, Issue-6, Page No-619-624], (ISSN 2347 - 5552). www.ijirem.org