Fluid Flow Analysis of Concentric Heat Exchanger with Different Nano Fluids and Mass Flow Rates

G. Kondaiah; G. E. Babu; K. Venkateswarlu

doi:10.55524/ijirem.2022.9.5.28

Abstract

In this article, the overall performance of water and other nano fluids mixed with base fluid water in a twin pipe warmth exchanger is investigated. At quantity fractions of 0.35 percentage, the nano fluids are Silicon Oxide and silver nano fluid. The traits of nano fluids are decided the usage of theoretical calculations, which can be then utilised as inputs for analysis. CATIA parametric software program is used to create a 3D model of the dual pipe heat exchanger (plain and coil insert tube). CFD research of a dual pipe warmth exchanger with water, silicon oxide, and silver nano particle at diverse mass float fees of zero.32, zero. Fifty two, 0.72,zero.Ninety two, and 1.12 kg/sec is performed. Theoretical calculations on the twin pipe warmness exchanger had been additionally finished.

Keywords

CFD, NANO FLUID, CATIA,

References

Z.Said, S.M.A. Rahman, M. El Haj Assad, Abdul HaiAlami, (2019), “Heat transfer enhancement and life cycle analysis of a Shell-and-Tube Heat Exchanger using stable CuO/water nanofluid” Sustainable Energy Technologies and Assessments, Vol.31, PP.306-317.
Kevin J. Albrecht, Clifford K. Ho, (2019), “Design and operating considerations for a shell-and-plate, moving packed-bed, particle-to-sCO2 heat exchanger”, Solar Energy, Vol.178, PP.331-340.
Uttam Roy, MrinmoyMajumder, (2019), “Evaluating heat transfer analysis in heat exchanger using NN with IGWO algorithm”, Vacuum, Vol.161, PP.186-193.
Xuen Chen, Chuang Sun, Xinlin Xia, Rongqiang Liu, Fuqiang Wang, “Conjugated heat analysisof a foam filled double pipe heat exchanger for high temperature application”, International Journal of Heat and Mass Transfer, 134 1003- 1013 (2019)
Sheikholeslami, M. and Ganji, D.D., 2016. Heat transfer improvement in a double pipe heat exchanger by means of perforated turbulators. Energy conversion and management, 127, pp.112-123, 2019
M.H. Bahmani, G. Sheikhzadeh, M. Zarringhalam, O.A. Akbari, A.A Alrashed, G.A.S. Shabani, and M. Goodarzi, Investigation of turbulent heat transfer and nanofluid flow in a double pipe heat exchanger. Advanced Powder Technology, 29(2), pp.273-282, 2018.
M.M. Heyhat, A. Abdi and A. Jafarzad, Performance evaluation and exergy analysis of a double pipe heat exchanger under air bubble injection. Applied Thermal Engineering, 143, pp.582-593, 2018.
Marwa A.W. Ali, Wael M. El Maghlany, Yehia A. Eldrainy, Abdelhamid Attia. ”Heat Transfer enhancement of double pipe heat exchanger using rotating of variable eccentricity inner pipe”, Alexandria Engineering Journal, 57, 3709 3725 (2018).
Shuyong Liu, Ming Jin, KefengLyu, Tao Zhou, Zhumin Zhao, (2018), “Flow and heat transfer behaviors for doublewalled-straight-tube heat exchanger of HLM loop”, Annals of Nuclear Energy, Vol.120, PP.604-610.
SoheilSoleimanikutanaeia, C.X. Lina, DexinWangb, (2018), “Modeling and simulation of cross-flow transport membrane condenser heat exchangers”, International Communications in Heat and Mass Transfer, Vol.95, PP.92-97.
Han Xiaoxing, Wang Yaxiong, (2018), “Experimental investigation of the thermal performance of a novel concentric tube heat pipe heat exchanger” International Journal of Heat and Mass Transfer, Vol.127, PP.1338-1342.
N.Piroozfam, A. HosseinpourShafaghi, S.E. Razavi, (2018), “Numerical investigation of three methods for improving heat transfer in counter-flow heat exchangers”, International Journal of Thermal Sciences, Vol.133, PP.230-239.
R.Whalley, K.M. Ebrahimi, (2018), “Heat Exchanger Dynamic Analysis”, Applied Mathematical Modelling.
Anas El Maakoul, Azzeddine Laknizi, Said Saadeddine, Abdellatif Ben Abdellah, Mohamed Meziane, Mustapha El Metoui, “Numerical deisgn and investigation of heat transfer enhancement and performance for an annulus with continuous helical baffles in a double pipe heat exchanger”, Energy Conversion and Management, 133 76-86 (2017).
Kamlel Milani Shirvan, Soroush Mirzakhanlari, Soteris A. Kalogirous, Hakan F. Oztop, Mojtaba Mamourian,” Heat Transfer and Sensitivity Analysis in a Double Pipe Heat Exchanger Filled with Porous Medium”, International Journal of Thermal Sciences 121 124-137 (2017)
MohamadOmidi, MousaFarhadi, MohamadJafari, (2017), “A comprehensive review on double pipe heat exchangers”, Applied thermal Engineering, Vol.110, PP.1075-1090.
SuxinQian, Jianlin Yu, Gang Yan, (2017), “A review of regenerative heat exchange methods for various cooling technologies”, Renewable and Sustainable Energy Reviews, Vol.69, PP.535-550.
T.N. Verma, P. Nashine, D.V. Singh, T.S. Singh, D. Panwar, (2017), “ANN: Prediction of an experimental heat transfer analysis of concentric tube heat exchanger with corrugated inner tubes” Applied Thermal Engineering.
M. Sheikholeslami, D.D. Ganji, (2016), “Heat transfer improvement in a double pipe heat exchanger by means of perforated turbulators”, Energy Conversion and Management, Vol.127, PP.112-123.
A.Bejan, M. Alalaimi, S. Lorente, A.S. Sabau, J.W. Klett, (2016), “Counterflow heat exchanger with core and plenums at both ends” International Journal of Heat and Mass Transfer, Vol.99, PP.622-629.

Cites this article as

G. K. , G. E. Babu, K. Venkateswarlu, "Fluid Flow Analysis of Concentric Heat Exchanger with Different Nano Fluids and Mass Flow Rates", International Journal of Innovative Research in Engineering & Management (IJIREM), Vol-9, Issue-5, Page No-201-209, 2022. Available from: https://doi.org/10.55524/ijirem.2022.9.5.28

Corresponding Author

G. Kondaiah

Associate Professor, Department of Mechanical Engineering, Pace Institute of Technology and Sciences (Autonomous), Andhra Pradesh, India

Download Full Paper

Download PDF

No. of Downloads: 27 | No. of Views: 841

Optimization of Machining Parameters of FG300 Flange Using ANOVA Technique under MQL

Pravin K. Paramkar, Ajit. R. Balwan.

June 2025 - Vol 12, Issue 3
8D Approach to Improve Productivity for Manufacturing Industry

Rahul Patil, A. R. Balwan.

April 2025 - Vol 12, Issue 2
Performance Improvement of Industrial Gas Turbine for Power Augmentation in the Nigeria Oil and Gas Sector

Diwa James Enyia, Udeme Eyo Ansa, Dane Osim-Asu, Chidiebere Jeffery Ogochukwu, Stanley James-Diwa Enyia.

August 2024 - Vol 11, Issue 4

-->

Fluid Flow Analysis of Concentric Heat Exchanger with Different Nano Fluids and Mass Flow Rates

Citations

Download Full Paper PDF

Total View 841

Total Download 27