Performance of Bitumen Mixes Using E-Waste for Flexible Pavements

Iqra Meerak; Asif Altaf

doi:10.55524/ijirem.2023.10.4.22

Abstract

The rapid advancement in technology has led to a substantial increase in electronic waste (e-waste) generation globally. The disposal of e-waste presents significant environmental challenges due to the presence of hazardous components. In an effort to address these concerns and explore sustainable solutions, this study investigates the potential of incorporating e-waste materials in bitumen mixes for flexible pavement applications. This research aims to evaluate the performance characteristics of bitumen mixes containing varying proportions of e-waste, aiming to determine their feasibility and suitability for real-world road construction. In this study, e-waste materials, predominantly consisting of electronic components like printed circuit boards, are processed and treated to be incorporated into bitumen mixes. A series of laboratory experiments are conducted to assess key performance parameters of the e-waste-modified bitumen mixes, including rutting resistance, fatigue behavior, stability, and moisture susceptibility. These results are compared with conventional bitumen mixes to ascertain the effect of e-waste on pavement performance. Preliminary findings indicate that the incorporation of e-waste into bitumen mixes influences the mechanical properties of the resulting blends. The modified bitumen exhibits improved resistance to rutting and enhanced fatigue characteristics in comparison to conventional bitumen mixes. Additionally, the stability of the e-waste-modified mixes demonstrates promising results, suggesting their potential for load-bearing applications. However, concerns related to moisture susceptibility and long-term durability need further investigation. This research contributes to the ongoing efforts towards sustainable waste management and eco-friendly road construction practices. The findings offer insights into the viability of utilizing e-waste materials as an additive in bitumen mixes for flexible pavements, showcasing the potential to reduce the environmental impact of both electronic waste disposal and road construction. Further studies involving long-term field performance and environmental assessments are recommended to validate the laboratory findings and ensure the safe implementation of e-waste-modified bitumen mixes in actual road infrastructure.

Keywords

e-Waste, Bitumen Mixes, Flexible Pavements, Sustainable Construction, Pavement Performance.

Reference

[1] Rajasekaran, S., Vasudevan, R., &Paulraj, S. (2013). Reuse of Waste Plastics Coated Aggregates-Bitumen Mix Composite for Road Application—Green Method. American Journal of Engineering and Research, 2, 1-13.

[2] Montepara, A., & Giuliani, F. (2000). Performance Testing and Specifications for Binder and Mix. Comparison between Ageing Simulation Tests of Road Bitumen. In Proceedings of the Papers Submitted for Review at 2nd Eurasphalt and Eurobitume Congress, held 20-22 September 2000, Barcelona, Spain. Book 1-session 1

[3] Jenkins, K. J., Molenaar, A. A. A., De Groot, J. L. A., & Van de Ven, M. E. C. (2000). Developments in the uses of foamed bitumen in road pavements. HERON, vol. 45 (3), 2000.

[4] Nemade, S. N., &Thorat, P. V. (2013). Utilization of polymer waste for modification of bitumen in road construction. Scientific Reviews and Chemical Communications, 2(3), 198-213.

[5] Raol, H., Parmar, A., Patel, D., &Jayswal, J. (2014). Effect of the use of Crumb rubber in conventional bitumen on the Marshall Stability value. Journal of Research in Engineering and Technology, 3(01).

[6] Bale, A. S. (2011). Potential reuse of plastic waste in road construction: a review. International Journal of Advances in Engineering & Technology (IJAET), 2, 233- 236.

[7] Vamshi, A. (2013). Use of waste plastic in construction of bituminous road. Journal of Engineering (JOE) ISSN, 2325-0224.

[8] Buczy?ski, P. (2016). The Frost Resistance of Recycled Cold Mixes with Foamed Bitumen and Different Types of Road Binders. Procedia engineering, 161, 54-59.

[9] Appiah, J. K., Berko-Boateng, V. N., &Tagbor, T. A. (2017). Use of waste plastic materials for road construction in Ghana. Case studies in construction materials, 6, 1-7.

Cites this article as

I. Meerak, A. A. , "Performance of Bitumen Mixes Using E-Waste for Flexible Pavements", International Journal of Innovative Research in Engineering & Management (IJIREM), Vol-10, Issue-4, Page No-168-173, 2023. Available from: https://doi.org/10.55524/ijirem.2023.10.4.22