Volume- 3
Issue- 3
Year- 2016
Article Tools: Print the Abstract | Indexing metadata | How to cite item | Email this article | Post a Comment
Khushaboo Singh , Krishna Purohit , Dr. P M Meena
In the present scenario, the huge demand of energy and economy create the necessity to give importance to all types of energy resources either it is conventional or nonconventional. Since the rapid consumption of fossil fuel over billions of people across the world are still unable to assess electricity. Furthermore, if the consumption of fossil fuel will be continued then our future generation will certainly have to face the shortage of it and the global warming potential and ozone layer depletion will also increase. Solar collectors (mirrors) suffer from the dust deposition which requires frequent cleaning to maintain their efficiency. Since hundred thousand square meters of solar mirror are required even for a relatively small solar power plant, the cleaning on such a large mirror surfaces involves a significant operation and maintenance (O&M) activities and cost in concentrating solar thermal power plants. Dust deposition on solar mirror surface is site specific and the dust characterization for each site is required in order to optimize the solar mirror cleaning activities.
[1] Atul Sagade, Nilkanth Shinde, Performance evaluation of parabolic dish type solar collector for industrial heating application, International Journal of Energy Technology and Policy, 2012 Vol.8, No.1, pp.80 – 93.
[2] Bergeron, B. K. and Freese, J. M., 1981, Cleaning strategies for parabolic-trough solar collector fields; guidelines for decisions, SAND81-0385.
[3] Blackmon, J. B. and Curcija, M., 1978, Heliostat reflectivity variations due to dust build up under desert conditions, Seminar on Testing Solar Energy Materials and Systems, M. Gaithersburg. Mt. Prospect, Ill., Institute of Environmental Sciences, 169-183.
[4] Briefing given at : http://www.greenashram.org/solarenerg
[5] Deepak Gadhia, Parabolic Solar Concentrators for Cooking and Food Processing, International Solar Food Processing Conference 2009.
[6] Details available from : www.clique.in/ARUN PROFILE.pdf
[7] Dudley V, Kolb G, Sloan M, Kearney D. SEG2 LS2 solar Collector-Test Results, SANDIA94-1884, Sandia National Laboratories, Albuquerque, NM, USA. 1994
[8] Elminir, H. K., Ghitas, A. E., Hamid, R.H., El- Hussainy, F., Beheary, M.M., and Abdel-Moneim, K. M., 2006, Effect of dust on the transparent cover of solar collectors, Energy Conversion and Management, Volume 47, Issues 18-19, November 2006, Pages 3192-3203
[9] El-Nashar, A. M., 2009, Seasonal effect of dust deposition on a field of evacuated tube collectors on the performance of a solar desalination plant, Desalination, vol. 239, pp. 66-81.
[10] El-Shobokshy, M.S. and Hussein, F.M., 1993, Effect of the dust with different physical properties on the performance of photovoltaic cells. Solar Energy, 51(6), 505–511.
[11] Fernandez-Garci A, Zarza E, Valenzuela L, Perez M. Parabolic-trough solar collectors and their applications. Renewable and Sustainable Energy Review 2010; 14:1695–1721.
[12] Garg, H.P., 1974, Effect of dirt on transparent covers in flat plate solar energy collectors. Solar Energy, 15,299– 302
[13] Garcia IL, A’Ivarez JL, Blanco D. Performance model for parabolic solar thermal power plants with thermal storage: Comparison to operating plant data. Solar Energy 2011; 85: 2443–2460.
[14] Goossens, D.V. and Kerschaever, E., 1999, Areolian dust deposition on photovoltaic solar cells: the effects of wind velocity and airborne dust concentration on cell performance. Solar Energy, 4, 277–289.
[15] Hegazy, A.A., 2001, Effect of dust accumulation on solar transmittance through glass covers of plate-type collectors. Renewable Energy, 22, 525–540.
[16] Hermann U, Kelly B, Price H. Two-Tank Molten Salt Storage for Parabolic Trough Solar Power Plants. Energy 2004; 29(5-6):883–893.
[17] Kalogirou S, Lloyd S, Ward J. Modelling, Optimization and Performance Evaluation of a Parabolic Trough Solar Collector Steam Generation System. Solar Energy 1997; 60(1):49–59.
[18] Kalogirou SA. Solar thermal collectors and applications. Progress in Energy and Combustion Science 2004; 30(3):231–295.
[19] Kaldellis, J.K., Fragos, P., Kapsali, M., Zafirakis, D. and Spyropoulos, G., 2010, Dust deposition impact on photovoltaic-assisted water pumping systems. In: WREC XI: Proceedings of 11th World Renewable Energy Congress, 25–30 September 2010, Abu Dhabi, UAE (UK: Future Technology Press), pp. 1117–1122.
[20] Lippke F. Simulation of the Part-Load Behavior SEGS Plant, SAND95-1293. Sandia National Laboratories: Albuquerque, NM, USA, 1995.
[21] Lovegrove K. and Stein, W., 2012, Concentrating solar power technology, Woodhead Publishing Limited.
[22] Mastekbayeva, G.A. and Kumar, S., 2000, Effect of dust on the transmittance of low density polyethylene glazing in tropical climate. Solar Energy, 68, 135–141.
[23] Malato S, Blanco J, Alarcon DC, Maldonado MI, Fernandez-Ibanez P, Gernjak W. Photo catalytic decontamination and disinfection of water with solar collectors. Catalysis Today 2007; 122(1-2):137–149.
[24] Moharram, K.A., Abd-Elhady, M.S., Kandil, H.A. and ElSherif, H., 2013, Influence of cleaning using water and surfactants on the performance of photovoltaic panels, Energy Conversion and Management, Volume 68, April 2013, Pages 266-272.
[25] M. Eswaramoorthy; S. Shanmugam, The Thermal Performance of a Low Cost Solar Parabolic Dish Collector for Process Heat, Energy Sources: Recovery, Utilization, and Environmental Effects Vol.: 34, No.: 18, July, 10 2012, pp – 1731-1736.
[26] Nahar, N.M. and Gupta, J.P., 1990, Effect of dust on transmittance of glazing materials for solar collectors under arid zone condition of India. Solar Wind Technology, 7, 213–237.
[27] Niknia, I., Yaghoubi M. and Hessami R., 2012, A novel experimental method to find dust deposition effect on the performance of parabolic trough solar collectors, International Journal of Environmental Studies Vol. 69, pp. 233-252.
[28] Price H, Lupfert E, Kearney D. Advances in Parabolic Trough Solar Power. Journal of Solar Engineering2002; 124(2):109–126.
[29] Rolim MM, Fraidenraich N, Tiba C. Analytic Modeling of Solar Power Plant with Parabolic Linear Collectors. Solar Energy 2009; 83:126–133.
[30] Sayigh, A., Al-Jandal, S. and Ahmed, H., 1985, Dust effect on solar flat surfaces devices in Kuwait. In: C. Furlan, NA. Mancini, A. Sayigh and B. Seraphin (Eds) Proceedings of the Workshop on the Physics of NonConventional Energy Sources and Materials Science for Energy, 2–20 September 1985, ICTP, Trieste, Italy (New York: World Scientific), pp. 353–367.
[31] Åžahin, A.D., 2007, A new formulation for solar irradiation and sunshine duration estimation. International Journal of Energy Research, 31(2), 109–118.
[32] Sansoni, P., Fontani, D., Fransini, F., Giannuzzi, A., Sani, E., Mercatelli, L. and Jafrancesco, D., 2011, Optical collection efficiency and orientation of a solar trough medium-power plant installed in Italy. Renewable Energy, 36(9), 2341–2347.
[33] Shao, Y., 2008, Physics and modelling of wind erosion, Springer.
[34] Strachan, J. W. and Houser, R. M., 1993, Testing and evaluation of large-area heliostats for solar thermal applications, SAND92-1381.
[35] Yaghoubi, M., Niknia, I., Kanaan, P. and Mahmoodpoor, A.R., 2011. Experimental study of dust deposition effect on the performances of parabolic trough collectors. In: Solar PACES 2011: Proceedings of 17th Solar Paces Conference, 20–23 September 2011, Granada, Spain. .
[36] Zhang L, Wang W, Yu Z, Fan L, Hu Y, Ni Y, Fan J,Cen K. An experimental investigation of a natural circulation heat tube system applied to a parabolic trough solar collector steam generation system. Solar Energy 2012; 86:911–919.
Mechanical Department, JNVU / MBM Engineering College, Jodhpur, India,
No. of Downloads: 10 | No. of Views: 847
