Experimental Investigation on the Effect Polypropylene Fibre and E-Waste Fibre Embedded in Concrete

Arooba Rafiq Bhat; Ajay Vikram

doi:10.55524/ijirem.2022.9.6.15

Abstract

The main building material that can’t be ignored even it’s weak in tension and lead to various environmental problems during it’s production is concrete. Properties of concrete can be enhanced using fibre in concrete. Using fibre from waste of plastic in concrete to some percentage increases strength as well as durability of concrete and solve disposal problems of plastic waste in environment. From electronic waste Polyvinyl chloride cables (PVC) are used as fibre and from polypropylene (PP) packing bag of cement are used as fibre in concrete. Both are used in 0%, 0.25%, 0.50%, 0.75% and 1% by weight of cement in concrete. Fresh and harden properties for both concrete with polypropylene fibre and with electronic waste fibre is determined and hybrid of optimum values calculated is used in a single mix and compressive strength is calculated. Results show that 0.75% and 0.50% is optimum value of concrete with electronic waste fibre and concrete with polypropylene fibre with 49% and 17.5% increase in concrete strength compared to normal concrete respectively and can be used in a single mixture. Concrete with hybrid of polypropylene fibre and electronic waste fibre shows enhancement of 56% in compressive strength. The hybrid of PPFRC and EFRC polypropylene fibre keep cracks small and e-waste fibre shows enhancement in mechanical properties.

Keywords

Concrete; Cement Bag; Polyvinyl Chloride Fibre; Compressive Strength; Hybrid Fibre Reinforced Concrete

References

[1] James, I.D., 1996. ACI Committee 544,“State-ofthe-art report on fiber reinforced concrete”, ACI Committee 544 report 544.1 R-96. Detroit: American Concrete Institute.

[2] Bagherzadeh, R., Pakravan, H.R., Sadeghi, A.H., Latifi, M. and Merati, A.A., 2012. An investigation on adding polypropylene fibers to reinforce lightweight cement composites (LWC). Journal of Engineered Fibers and Fabrics, 7(4), p.155892501200700410.

[3] Basheer, E.S. and Antony, E.M., 2017. Experimental Investigation of Hybrid Fibre Reinforced Concrete Short Columns Using Micro Steel Fibre and E-Waste Fibre. International Research Journal of Engineering and Technology, 4(4).

[4] Amit Gupta, P. R.. Sharma, 2015. Investigation on Properties of Steel Fibre Reinforced Concrete. International Journal of Engineering Research & Technology, 9(12).

[5] Shakor, P.N. and Pimplikar, S.S., 2011. Glass fibre reinforced concrete use in construction. Int. J. Technol. Eng. Syst, 2(2).

[6] Kavitha, S. and Kala, T.F., 2017. A review on natural fibres in the concrete. Int. J. Adv. Eng. Technol, 1(1), pp.1-4.

[7] Noushini, A., Samali, B. and Vessalas, K., 2013. Effect of polyvinyl alcohol (PVA) fibre on dynamic and material properties of fibre reinforced concrete. Construction and Building Materials, 49, pp.374-383.

[8] MaÅ‚ek, M., Åasica, W., Kadela, M., KluczyÅ„ski, J. and Dudek, D., 2021. Physical and mechanical properties of polypropylene fibre-reinforced cement–glass composite. Materials, 14(3), p.637.

[9] Fu, C., Ye, H., Wang, K., Zhu, K. and He, C., 2019. Evolution of mechanical properties of steel fiber-reinforced rubberized concrete (FR-RC). Composites Part B: Engineering, 160, pp.158-166.

[10] Adamczyk, W.P., Gorski, M., Ostrowski, Z., Bialecki, R., Kruczek, G., PrzybyÅ‚a, G., Krzywon, R. and Bialozor, R., 2019. Application of numerical procedure for thermal diagnostics of the delamination of strengthening material at concrete construction. International Journal of Numerical Methods for Heat & Fluid Flow.

[11] Afroughsabet, V., Biolzi, L. and Ozbakkaloglu, T., 2016. High-performance fiber-reinforced concrete: a review. Journal of materials science, 51(14), pp.6517-6551.

[12] Hu, S., Cai, H., Hong, R., Li, M. and Yao, F., 2021. Performance test and microstructure of modified PVC aggregate-hybrid fiber reinforced engineering cementitious composite (ECC). Materials, 14(8), p.1856.

[13] Sainz-Aja, J.A., Sanchez, M., Gonzalez, L., Tamayo, P., Garcia del Angel, G., Aghajanian, A., Diego, S. and Thomas, C., 2022. Recycled Polyethylene Fibres for Structural Concrete. Applied Sciences, 12(6), p.2867.

[14] Gull, I. and Balasubramanian, M., 2014. A new paradigm on experimental investigation of concrete for e-plastic waste management. Int. J. Eng. Trends Technol, 10(4), pp.180-186.

[15] Khan, S., Khan, R.A., Khan, A.R., Islam, M. and Nayal, S., 2015. Mechanical properties of Polypropylene Fibre reinforced concrete for M 25 & M 30 mixes: A Comparative study. International Journal of Scientific Engineering and Applied Sciences, 1(6).

[16] Aljalawi, N.M.F. and Al-Jelawy, H.M., 2018. Possibility of using concrete reinforced by carbon fibre in construction. International Journal of Engineering & Technology, 7(4.20), pp.449-452.

[17] Prof., Dr. Hamed M. Jassima, Dr. A. G. Anwarb, 2017. Experimental Study of Polypropylene Fibre-Reinforced Concrete, international journal of R&D in engineering, science and management, 4(3).

Cites this article as

A. R. Bhat, . A. Vikram, "Experimental Investigation on the Effect Polypropylene Fibre and E-Waste Fibre Embedded in Concrete", International Journal of Innovative Research in Engineering & Management (IJIREM), Vol-9, Issue-6, Page No-89-93, 2022. Available from: https://doi.org/10.55524/ijirem.2022.9.6.15

Corresponding Author

Arooba Rafiq Bhat

B.Tech Scholar, Department of Civil Engineering, Rayat Bahra University, Mohali, Punjab, India

Download Full Paper

Download PDF

No. of Downloads: 46 | No. of Views: 1129

-->

Experimental Investigation on the Effect Polypropylene Fibre and E-Waste Fibre Embedded in Concrete

Citations

Download Full Paper PDF

Total View 1129

Total Download 46