IJIREM

Abstract

A concrete type with a significant porosity is pervious concrete. It is applied to concrete flat constructions so that water can travel through it.. A commercial by-product created during the manufacturing of silicon metal or silicon alloys is silica fume. It is also known that silica fume enhances the mechanical properties of concrete. The main physical impact of silica fume in concrete is that it acts as a filler. Sand fills the spaces between the particles of coarse aggregate, and cement grains fill the spaces between sand grains because of their similar sizes. This highly active pozzolan reacts more quickly than regular pozzolans in terms of the chemical reaction of silica fume due to its high surface area and high amount of amorphous silica. The use of silica fume in concrete offers both engineering and financial benefits. This study discusses the ideal silica fume content for the cost-effective and sustainable manufacture of concrete based on the findings of experimental research. When used as a partial replacement for opc, silica fume is shown to work best at a level of 15% (by weight). Utilizing silica fume raises strength metrics significantly while reducing workability.

Keywords

Silica Fume, Opc, Compressive Strength, Flexural Strength.

Reference

Ajamu, S.O., Jimoh, A.A., Olurem, I J.R., (2012) Evaluation of Structural Performance of Pervious Concrete in Construction, International Journal of Engineering and technology.
Agilandeswari, N.H., Ashif, J.H., Sharafath, M., Vadivel, B., Renukadevy, R., (2017).An Experimental Study on Performance of Pervious Concrete Using Partial Replacement of Recycled Concrete Aggregate International Journal of Innovative Research in Science, Engineering and Technology, ISSN: 2319-8753.
Neville, A.M. (1996): Properties of Concrete. John Willey & Sons. INC. New York. USA. [13]. PP 711-713
Chakravarti, B. J., Sushmita, B., Murthy, K.N.R., (2019). Study on pervious concrete International Journal of Civil Engineering and Technology ISSN: 0976-6316.
Madhavi, K., Harshith, V.V., Gangadhar, M., Kumar, V.C. and Raghavendra, T., 2021. External strengthening of concrete with natural and synthetic fiber composites. Materials Today: Proceedings, 38, pp.2803-2809.
Damirboga R., Thermal Conductivity and Compressive Strength of Expanded Perlite Aggregate Concrete with Mineral Admixtures, Energy and Buildings, Elsevier, September 2003.
Udeme J Ndon, Trends in the Application of Permeable Pavement as Sustainable Highway Storm Water Management Option for Safe-Use of Roadways, Journal of Civil & Environmental Engineering, 7, ISSN: 2165-784X, 6(7), 2-15
Fulton, F. S. 1977. Concrete Technology. Cape & Transversal Printers Limited. Republic of South Africa.pp 370-375.
IS-3812(2)-2013: Pulverised Fuel Ash Specification
IS-15388(2003): Silica Fume-Specification
McCain, G. N., & Dewoolkar, M. M. (2010). Porous Concrete Pavements: Mechanical and Hydraulic Properties. Transportation Research Record, 2164(1), 66–75. https://doi.org/10.3141/2164-09
Ailing yao (2010) Study Of Waste Security Of Asphalt Base In Cold Regions.
Jiusu, L., Hanning, X., Yong Z., (2008). Influence of Coating Recycled Aggregate Surface With Pozzolanic Powder On Properties Of Recycled Aggregate Concrete, Construction and Building Materials 23 (2009) 12871291

Cites this article as

[Safoora Tariq, Manish Kaushal (2023), Study of Previous Concrete Using Silica Fume, International Journal of Innovative Research in Engineering & Management (IJIREM), Vol-10, Issue-1, Page No-80-85], (ISSN 2347 - 5552). www.ijirem.org